{"product_id":"msl-pbhmth26-bonnet-hinge-mount-toyota-hilux-2026-passenger-side","title":"MSL PBHMTH26 Bonnet Hinge Mount, Toyota Hilux 2026+ Passenger Side","description":"\u003ch2\u003eToyota Hilux 2026+ Bonnet Hinge Antenna Mount, Passenger Side\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart number: PBHMTH26.\u003c\/strong\u003e This is the passenger-side bracket for the Toyota Hilux, 2026 onwards. On NZ-new vehicles that's the left-hand side as you sit in the cab. Need the other side? See the \u003ca href=\"\/products\/msl-dbhmth26-bonnet-hinge-mount-toyota-hilux-2026-driver-side\"\u003eDBHMTH26 driver-side bracket\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eWant a solid antenna mount on the new Hilux without drilling a single hole? The PBHMTH26 is a 3mm stainless steel bonnet hinge bracket, custom made for MSL to suit the passenger-side bonnet hinge on the Toyota Hilux from 2026 onwards.\u003c\/p\u003e\n\u003cp\u003eIt fits under the factory bonnet hinge bolts and gives you a firm, low-profile platform for a UHF CB or land mobile radio antenna base. It follows the same proven approach as the \u003ca href=\"\/products\/gme-bhm01-bonnet-hinge-mount-type-1\"\u003eGME BHM bonnet hinge range\u003c\/a\u003e, shaped specifically for the latest Hilux.\u003c\/p\u003e\n\u003cp\u003eRunning two radios, such as a UHF CB and a land mobile set? Pair it with the driver-side bracket and keep each antenna on its own side of the bonnet.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific fit for the 2026+ Hilux\u003c\/strong\u003e means the bracket lines up with the factory passenger-side hinge, for installers who want a tidy job without guesswork or modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-drill installation\u003c\/strong\u003e means no holes in the guard or bonnet, for fleet, lease and resale-conscious owners who want the bodywork left untouched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3mm stainless steel construction\u003c\/strong\u003e means a rigid base that holds an antenna steady over rough gravel roads and farm tracks, for utes that work for a living.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural stainless finish, no powder coat\u003c\/strong\u003e means there's no coating to chip, flake or touch up, for vehicles that spend their days in the weather.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard antenna base hole\u003c\/strong\u003e means it suits common MBC-style antenna bases, for UHF CB, VHF and UHF land mobile radio antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile design that sits alongside the hinge\u003c\/strong\u003e means the antenna is mounted high on the vehicle for better coverage, for drivers who need reliable comms out of town.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom made for MSL\u003c\/strong\u003e means a bracket designed around real NZ ute fitouts, backed by our install team in Mt Maunganui.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFarm, orchard and kiwifruit utes\u003c\/li\u003e\n\u003cli\u003eConstruction and contractor vehicles\u003c\/li\u003e\n\u003cli\u003eCouncil, utility and fleet vehicles\u003c\/li\u003e\n\u003cli\u003eEmergency services and volunteer response vehicles\u003c\/li\u003e\n\u003cli\u003eRecreational 4WD and touring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x PBHMTH26 passenger-side bonnet hinge bracket, Toyota Hilux 2026 onwards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e mounting bolts (the bracket reuses your vehicle's existing bonnet hinge bolts), antenna base, antenna and coaxial cable. These are sold separately.\u003c\/p\u003e\n\u003ch3\u003eComplete Your Setup\u003c\/h3\u003e\n\u003cp\u003eThe bracket needs an antenna base before you can fit an antenna. These bases suit the standard mounting hole:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rfi-mbc-00-53-mbc\"\u003eRFI MBC-00-53 MBC Base, No Connector\u003c\/a\u003e: a bare base for installers who want to terminate their own coax.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rfi-mbc-00-50f-mbc-base-0-5m-rg174-cable-fme-m\"\u003eRFI MBC-00-50F MBC Base with 0.5m RG174 Cable and FME(M)\u003c\/a\u003e: a pre-terminated base for a quicker plug-in install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure which antenna suits your radio? Browse our \u003ca href=\"\/collections\/wireless-vhf-uhf-antennas\"\u003eantennas and antenna bases\u003c\/a\u003e, or talk to our team and we'll match the right antenna to your band and coverage needs.\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003cp\u003eNo dedicated installation sheet is available for this bracket. The steps below are general guidance based on standard bonnet hinge mount installs. If you're not confident, our technicians can fit it for you.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePark on level ground, open the bonnet and make sure it's securely supported.\u003c\/li\u003e\n\u003cli\u003eMark the position of the passenger-side hinge (a paint pen around the hinge edge works well) so the bonnet alignment can be restored.\u003c\/li\u003e\n\u003cli\u003eRemove the hinge bolts the bracket mounts under, working one bolt at a time where possible to help hold alignment.\u003c\/li\u003e\n\u003cli\u003ePosition the PBHMTH26 bracket, refit the factory bolts through it and tighten to the vehicle manufacturer's torque specification.\u003c\/li\u003e\n\u003cli\u003eFit the antenna base into the bracket and route the coax clear of the hinge, bonnet edge, sharp edges and hot engine components, entering the cabin through a suitable grommet.\u003c\/li\u003e\n\u003cli\u003eClose the bonnet slowly, checking for clearance and correct alignment before shutting it fully.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003ePBHMTH26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eToyota Hilux, 2026 onwards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting position\u003c\/td\u003e\n\u003ctd\u003ePassenger-side bonnet hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3mm stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eNatural stainless, not powder coated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna base hole\u003c\/td\u003e\n\u003ctd\u003e16mm, suits MBC-style bases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo-drill, uses existing bonnet hinge bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBolts\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture\u003c\/td\u003e\n\u003ctd\u003eCustom made for MSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the PBHMTH26 fit earlier Toyota Hilux models?\u003c\/h4\u003e\n\u003cp\u003eThe PBHMTH26 is made specifically for the passenger-side bonnet hinge on the Toyota Hilux from 2026 onwards. For earlier models, see our \u003ca href=\"\/products\/bhl2016l\"\u003eToyota Hilux 2016 passenger-side bracket\u003c\/a\u003e or \u003ca href=\"\/products\/bhll\"\u003eBHLL bracket for Hilux up to 2015\u003c\/a\u003e, and check fitment with our team if you're unsure.\u003c\/p\u003e\n\u003ch4\u003eAre bolts included with the PBHMTH26?\u003c\/h4\u003e\n\u003cp\u003eBolts are not included with the PBHMTH26. The bracket fits under your vehicle's existing bonnet hinge bolts, so there's nothing extra to buy for mounting.\u003c\/p\u003e\n\u003ch4\u003eWhat antennas can I mount on this bonnet hinge bracket?\u003c\/h4\u003e\n\u003cp\u003eThis bonnet hinge bracket suits antennas that fit an MBC-style base, which covers a wide range of UHF CB, VHF and UHF land mobile radio antennas. You'll need the antenna base as well, such as the RFI MBC-00-53 or MBC-00-50F.\u003c\/p\u003e\n\u003ch4\u003eIs the PBHMTH26 powder coated?\u003c\/h4\u003e\n\u003cp\u003eThe PBHMTH26 is not powder coated. It's left in its natural stainless steel finish, so there's no coating to chip or wear through.\u003c\/p\u003e\n\u003ch4\u003eCan MSL install the bracket and antenna for me?\u003c\/h4\u003e\n\u003cp\u003eYes, MSL can install the bracket, antenna and radio for you. Our technicians are based in Mt Maunganui and cover the greater Bay of Plenty, and we can point you to a partner installer elsewhere in the country.\u003c\/p\u003e\n\u003ch4\u003eDo I need a licence to use a radio with this antenna mount?\u003c\/h4\u003e\n\u003cp\u003eThe bracket itself needs no licence, but the radio you connect may. UHF CB radios are licence-free in NZ, while land mobile VHF and UHF radios operate under a licence. Talk to us if you're not sure which applies to your setup.\u003c\/p\u003e","brand":"MSL","offers":[{"title":"Default Title","offer_id":44948677754931,"sku":"PBHMTH26","price":109.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0026\/7357\/3939\/files\/PBHMTH26TOPVIEW.png?v=1790818400","url":"https:\/\/mobilesystems.nz\/products\/msl-pbhmth26-bonnet-hinge-mount-toyota-hilux-2026-passenger-side","provider":"Mobile Systems Limited","version":"1.0","type":"link"}