Dahua LR1002 Ethernet and PoE over Coax Extender, TX or RX
Discounts and Shipping calculated at checkout.
Pickup available from the Mobile Systems Showroom: 1/14 Portside Drive, Mount Maunganui. We will notify you when your order is ready for collection.
The Dahua LR1002 is a single-port long-reach Ethernet over coax extender that lets IP cameras run over existing coaxial cable, so older analogue CCTV systems can be upgraded to IP without rewiring. It carries both network data and PoE power over RG59 coax, at 100 Mbps for up to 400 m, or 10 Mbps for up to 1,000 m.
A link uses a pair: the receiver (LR1002-1EC) connects to the PoE switch, and the transmitter (LR1002-1ET) connects to the IP camera, with the coax cable running between them. The receiver takes PoE (802.3af/at) from the switch and passes it down the coax to power the camera, so no local power is needed at the camera end. Each unit has one RJ45 and one BNC port, with lightning protection and a wide -30 to +65 °C operating range.
Key features
- Runs IP cameras over existing RG59 coax cable
- Network data and PoE power over coax
- Up to 400 m at 100 Mbps, or 1,000 m at 10 Mbps
- Supports 802.3af and 802.3at PoE
- 1 x RJ45 and 1 x BNC port
- MDI/MDIX auto-sensing
- 4 kV lightning protection
- Compact, -30 to +65 °C
How to connect
PoE switch → network cable → LR1002-1EC receiver → coax cable → LR1002-1ET transmitter → network cable → IP camera. Each link needs one transmitter and one receiver. Up to 8 receivers can connect to the same switch.
Specifications
- Models: LR1002-1ET (transmitter), LR1002-1EC (receiver)
- Ports: 1 x RJ45 10/100 Mbps, 1 x BNC
- Transmission over RG59: 400 m at 100 Mbps, 1,000 m at 10 Mbps
- PoE: IEEE 802.3af, 802.3at
- Network standards: IEEE 802.3, 802.3u, 802.3x
- Power consumption: under 2 W
- Lightning protection: 4 kV common mode, 2 kV differential mode
- Operating temperature: -30 to +65 °C
- Operating humidity: 5 to 95%
- Dimensions: 79 x 52 x 23 mm
- Weight: 61 g
Power available to the camera over RG59
| Distance | Speed | 48 V switch | 53 V switch |
|---|---|---|---|
| 100 m | 100 Mbps | 21 W | 25.5 W |
| 200 m | 100 Mbps | 15 W | 24 W |
| 300 m | 100 Mbps | 11 W | 19 W |
| 400 m | 100 Mbps | 9 W | 16 W |
| 500 m | 10 Mbps | 7 W | 13 W |
| 800 m | 10 Mbps | 5 W | 8 W |
| 1,000 m | 10 Mbps | 4 W | 6 W |
Figures are based on RG59 cable with DC resistance under 5 Ω per 100 m. Available power falls with distance, so check the camera's power draw for longer runs.
Talk to the MSL team about the right surveillance solution for your site.
Overview
Features