GME ABL002F Elevated-Feed Antenna Base, FME Terminated
$125.00
GST Inclusive. Discounts and Shipping calculated at checkout.
Quantity
Pickup available from the Mobile Systems Showroom: 1/14 Portside Drive, Mount Maunganui. We will notify you when your order is ready for collection.
In stock, ready to be shipped
Stainless Steel Elevated-Feed Antenna Base, FME Terminated
What this is: the ABL002F is GME's elevated-feed antenna base in stainless steel, pre-terminated with an FME connector and supplied with an FME to PL259 adaptor. It is the FME version of the ABL002, functionally the same base, connector fitted for FME-first setups rather than a direct PL259 connection.
Overview
The GME ABL002F is a genuine stainless steel elevated-feed antenna base, built for GME's popular elevated-feed UHF CB antenna range. It ships with 4.5 metres of low-loss foam coaxial cable pre-fitted, terminated with an FME connector, plus an FME to PL259 adaptor so it drops straight onto a standard radio socket.
Genuine GME manufacture, built to handle the corrosion and vibration Bay of Plenty tradies, farmers and fleet operators put their gear through.
Key Features
- Ground independent design means reliable performance regardless of mounting position.
- Stainless steel finish means real corrosion resistance for coastal and rural conditions.
- Pre-terminated FME connector with an included FME to PL259 adaptor means a straightforward connection to a standard radio socket.
- 4.5 metres of low-loss foam coaxial cable means minimal signal loss over the cable run.
- Suits GME's popular elevated-feed antenna range means a direct factory-spec swap, not a generic fit.
Applications
- 4WD, fleet, and tradie vehicles running an elevated-feed UHF antenna
- Replacing a worn or damaged base on an existing elevated-feed antenna
- Building a new elevated-feed antenna setup from separate parts
What's in the Box
- Elevated-feed antenna base, stainless steel
- 4.5m low-loss foam coaxial cable, pre-terminated with FME
- FME to PL259 adaptor (AD503)
Sold separately: the antenna whip and any UHF CB radio.
Complete Your Setup
This base needs a compatible elevated-feed whip to complete the antenna. Genuine options already in stock include the AE4012 and the AE4018, or see the ready-assembled AE4018BK1 and AE4012K1 if you would rather buy base and whip as one unit.
Key Specifications
| Spec | Detail |
|---|---|
| Connector | FME, pre-terminated |
| Adaptor included | FME to PL259 (AD503) |
| Material | Stainless steel |
| Thread | 5/16 inch x 26 TPI (BSW) |
| Cable | 4.5m low-loss foam coaxial, pre-fitted |
| Design | Ground independent |
| Suits | GME AE4012, AE4017, AE4018, AE4018B, AE4018W |
| Warranty | 1 year |
FAQ
Does the ABL002F include the antenna whip?
No, the ABL002F is the base and lead assembly only. See our stocked AE4012 and AE4018 whips, or the ready-assembled AE4018BK1 and AE4012K1 if you would rather buy the complete antenna.
What is the difference between the ABL002 and the ABL002F?
The ABL002F is pre-terminated with an FME connector and comes with an FME to PL259 adaptor included. The ABL002 connects directly. Both are the same physical stainless steel base, check with our team if you are not sure which fits your setup.
Which antennas does the ABL002F suit?
It is designed by GME to suit the AE4012, AE4017, AE4018, AE4018B and AE4018W elevated-feed antenna range.
What warranty comes with the ABL002F?
It carries GME's standard 1 year warranty.
Overview
Features
Specifications
GME ABL002F Elevated-Feed Antenna Base, FME Terminated
$125.00