Tait MClipRT Heavy Duty Stainless Steel Microphone Clip

Heavy Duty Stainless Steel Microphone Clip

Genuine Tait part, as fitted with TM8000 and TM9000 mobile radios. Supplied with three stainless steel screws.

How many times has a mic clip bent, loosened or snapped off just when you needed it? The Tait MClipRT is a stainless steel microphone clip built noticeably stronger than standard light-gauge clips. It's the genuine Tait hanger for TM8000 and TM9000 series mobile radios, and it suits most other brands of radio microphone too.

It's the clip our technicians reach for whenever a vehicle, machine or vessel needs a mic clip. If you want the same hardware we'd fit ourselves, this is it.

Key Features

• Genuine Tait part for TM8000 and TM9000 radios means a like-for-like replacement, for Tait fleets that want original hardware back on the dash.
• Heavier-duty stainless steel build means a clip that copes with daily grab-and-hang use, for fleet drivers, operators and tradies who use their radio all day.
• Suits most brands of microphone means one clip covers a mixed fleet, for workshops and fleet managers running more than one radio brand.
• Stainless steel clip and screws mean better corrosion resistance than plain or painted steel, for coastal, marine and wash-down environments.
• Three-screw fixing means a solid mount that won't twist loose, for installs that take a knock every day.
• Compact 34 x 45 x 10 mm footprint means it fits tight dash panels, cab pillars and helm consoles, for installs where space is scarce.
• MSL's standard install clip means you're getting the same part our technicians fit, for customers who want replacement hardware that matches the original job.

Applications

• Tait TM8000 and TM9000 mobile radio installs, new or replacement
• Trucks, utes and fleet vehicles running two-way or UHF CB radios
• Earthmoving and agricultural machinery cabs
• Work boats and recreational vessels with marine VHF radios
• Replacing a worn, bent or broken mic clip on an existing install

What's in the Box

• Tait MClipRT stainless steel microphone clip (Tait part number 303-50145-00)
• 3 x stainless steel mounting screws

Microphone and radio sold separately.

Compatible With

Tait TM8000 and TM9000 series mobile radios, including the TM9300 and TM9700 ranges such as the Tait TM9355 and Tait TM9755.

Most other brands of mobile and marine radio microphone. If your mic uses a magnetic mount or a brand-specific bracket, check the alternatives below or send us the mic model and we'll confirm the fit before you order.

Key Specifications

FAQ

Will the MClipRT fit my microphone?
The MClipRT is the genuine Tait microphone hanger for TM8000 and TM9000 series radios, and it suits most other brands of radio microphone too. If you're unsure, send us the make and model of your radio or mic and we'll confirm the fit before you order.

Does the MClipRT come with screws?
The MClipRT comes with three stainless steel screws, so it's ready to fit straight out of the packet.

How is the MClipRT different from the Pacific Aerials P3030?
The MClipRT and the Pacific Aerials P3030 are both stainless steel, but the MClipRT is a noticeably stronger clip with a three-screw fixing, and it's the one MSL fits by default. The P3030 is a lighter, lower-cost option for standard mics.

Is the MClipRT suitable for boats and coastal vehicles?
The MClipRT is made from stainless steel and ships with stainless screws, a sensible combination where salt spray and wash-downs are part of the job. An occasional rinse with fresh water helps keep it looking its best.

Can MSL fit the MClipRT for me?
MSL can fit the MClipRT as part of a radio install or service visit anywhere in the greater Bay of Plenty. Get in touch with our Mt Maunganui team to book.

A mic clip should be the last thing you think about. This one is built to stay that way.