Tait TP3000-BAT 2000mAh Li-Ion Battery - TP3300 / TP3350

Genuine Tait 2000mAh Spare Battery for the TP3 Range

Recommended for: any TP3300 or TP3350 that runs a full shift. One spare per radio is the usual setup for crews working longer than a standard day.

Overview

The Tait TP3000-BAT is the genuine 2000mAh Li-Ion battery for the Tait TP3000 range, including the TP3300 and TP3350 DMR portable radios. It is the same standard battery the radio ships with, so fit, capacity and charging behaviour all match what your team already uses.

Got a radio that no longer makes it to knock-off time, or a crew pulling double shifts? A charged spare is the simplest fix. Stocked and supported from Mt Maunganui in the Bay of Plenty, and shipped NZ-wide.

Key Features

• Genuine Tait 2000mAh Li-Ion pack means the same capacity and fit as the battery your TP3 came with, for fleet managers who want no aftermarket guesswork.
• Up to 14.5 hours DMR shift life (Tait figure, 5/5/90 duty cycle) means a full working day on typical use, for site crews, event staff and security teams.
• Built-in over-current protection, temperature sensing and charge contact isolation means the pack looks after itself while charging and in use, for teams charging in vans, site offices and workshops.
• Light at 117g means a spare sits in a jacket pocket or kit bag without weighing anyone down, for supervisors and roaming staff.
• Charges in the Tait TP3000-CH1 and TP3000-CH6 means one charging setup covers both radios and spares, for anyone managing a shared charging station.
• Swap-in spare power means a flat radio is back in action without waiting on a charger, for anyone who cannot afford to go quiet mid-job.

Applications

• Construction and civil sites
• Events, venues and security
• Warehousing, manufacturing and logistics
• Hospitality, retail and schools
• Volunteer and community organisations

What's in the Box

• 1 x Tait TP3000-BAT 2000mAh Li-Ion battery

Note: the radio and charger are sold separately. Tait lists this item as the battery only, with no belt clip. The TP3 belt clip mounts on the battery, so move the clip across from your existing battery, or ask us about spare clips.

Complete Your Setup

• Tait TP3000-CH1 Single Charger: desktop charger with plug pack for one radio or spare battery.
• Tait TP3000-CH6 Six-Way Charger: charges up to six radios or batteries at a shared base.

Compatible Radios

• Tait TP3300 DMR and analogue portable radio
• Tait TP3350 DMR and analogue portable radio

For the TP3000 range only. This battery does not fit TP8000, TP9000 or Tait Open2 radios, and is not for use with intrinsically safe or non-incendive radios.

Key Specifications

Shift life figures are Tait's for the standard battery. GPS, Bluetooth, external audio accessories, volume, transmit power and backlight settings all affect real-world run time.

Downloads

• Tait TP3300 range brochure (PDF): radio and standard battery specifications.

Frequently Asked Questions

Will the TP3000-BAT fit my TP3300 or TP3350?
Yes, the TP3000-BAT fits both. It is Tait's standard battery for the whole TP3000 range, so it fits any TP3300 or TP3350 regardless of colour, keypad or frequency band.

How long does the TP3000-BAT last on a charge?
Tait rates the TP3000-BAT at up to 14.5 hours in DMR mode and 12.6 hours in analogue on a light 5/5/90 duty cycle. On a busier 5/35/60 cycle, expect around 10.4 hours DMR or 9.1 hours analogue. If your crew works longer shifts than that, a second battery is the answer.

Is the TP3000-BAT waterproof?
Tait rates the TP3300 and TP3350 to IP67 as complete radios. The battery is not given a separate rating of its own, so treat a loose spare like any electronics: keep the contacts clean and dry, and fit it fully before heading out in the weather.

Do I need a licence to use the TP3000-BAT?
No, you don't need a licence for the battery itself. The TP3 radio it powers will usually need its own radio licence for the frequencies it uses. If you're not sure whether your fleet is covered, talk to us and we'll check.

Can I charge a spare TP3000-BAT on its own?
Yes, you can charge it on its own. The Tait TP3000-CH1 and TP3000-CH6 chargers are made for TP3000 radios and batteries, so a spare charges without a radio attached.

Does the TP3000-BAT come with a belt clip?
No, Tait lists the TP3000-BAT as the battery only. The TP3 belt clip attaches to the battery, so swap it across from your old battery or ask us about spare clips.

Will the TP3000-BAT work in a Tait TP9300 or TP8100?
No, it is for the TP3000 range only. TP8000 and TP9000 radios use their own T03-00011 series batteries.