TP-Link Omada EAP215-Bridge KIT 5 GHz 867 Mbps Long-Range Wireless Bridge
$328.90 inc GST ($286.00 exc GST)
Discounts and Shipping calculated at checkout.
Quantity
Pickup available from the Mobile Systems Showroom: 1/14 Portside Drive, Mount Maunganui. We will notify you when your order is ready for collection.
Available to order. We'll confirm dispatch timing when you order.
The Omada EAP215-Bridge KIT is a 5 GHz long-range outdoor wireless bridge for linking buildings, gates, poles and remote sites without running cable. It carries data at up to 867 Mbps over distances of up to 5 km, making it ideal for connecting remote IP cameras, barrier gates, sheds, workshops and outbuildings back to the main network.
It supports point-to-point links, or point-to-multipoint with up to four remote units connecting to one central unit. A simple role switch sets each unit as the main or remote end, and built-in 14 dBi dual-polarised directional antennas focus the signal along the link. Its IP65 weatherproof housing operates from -40 to 70 °C with lightning and ESD protection, and it mounts on a pole or wall with the included kit. Three gigabit ports allow a camera or other device to connect directly at the remote end. It runs on 802.3af PoE, 24 V passive PoE (adaptor included) or 12 V DC, and can be managed through the web or centrally through the Omada controller and app.
Key features
- 5 GHz wireless link, up to 867 Mbps
- Up to 5 km transmission distance
- Point-to-point or point-to-multipoint (up to 1:4)
- 14 dBi dual-polarised directional MIMO antennas
- IP65 weatherproof, -40 to 70 °C
- Lightning and ESD protection
- 3 gigabit Ethernet ports
- 802.3af PoE, 24 V passive PoE (adaptor included) or 12 V DC
- Pole or wall mount (kit included)
- Omada centralised and cloud management
Specifications
Hardware
- Ports: 3 x gigabit Ethernet
- Role switch: DIP switch for main or remote end
- Power: 802.3af PoE, 24 V passive PoE or 12 V DC
- Max power consumption: 11.5 W
- Antenna: internal 2x2 dual-polarised directional MIMO, 14 dBi, 43° horizontal, 18° vertical
- Enclosure: IP65 weatherproof
- Lightning protection: ±8 kV air, ±4 kV contact, ±6 kV common mode
- Dimensions: 79 x 60 x 276 mm
- Mounting: pole or wall (kit included)
Wireless
- Standards: IEEE 802.11a/n/ac
- Frequency: 5 GHz
- Signal rate: up to 867 Mbps
- Distance: up to 5 km
- Modes: point-to-point, point-to-multipoint (up to 1:4)
- Functions: 2x2 MU-MIMO, up to 8 SSIDs, rate limiting, guest network, wireless and reboot schedules, RADIUS accounting
- Security: VLAN, rogue AP detection, up to 4,000 MAC filter entries, wireless encryption
Management
- Web, SSH and SNMP management
- Omada app and centralised management (requires an Omada cloud, hardware or software controller)
- Zero-touch provisioning, email alerts, backup and restore
Environment
- Operating temperature: -40 to 70 °C
- Operating humidity: 10 to 90%, non-condensing
- Certification: CE, FCC, RoHS
In the box
- EAP215-Bridge KIT
- Mounting kit
- Passive PoE adaptor
- Installation guide
Transmission distance and speed depend on a clear line of sight between units, antenna alignment and local interference. Each end of a link needs a bridge unit.
Talk to the MSL team about the right network for your surveillance and communications system.
Overview
Features
Specifications
TP-Link Omada EAP215-Bridge KIT 5 GHz 867 Mbps Long-Range Wireless Bridge
$328.90 inc GST ($286.00 exc GST)